Construction Details: Mansfield Collection

Mansfield collection bed and nightstand

Woods & Stains

This collection is available for order in the following standard woods and stains. Additional options may be available upon request for an upcharge of 10% - 20%. Contact us for details.

Click here for more information about the woods we use.

Natural Cherry

Natural Cherry

Windsor Cherry

Windsor Cherry

Autumn Cherry

Autumn Cherry

Cognac Cherry

Cognac Cherry

Saddle Cherry

Saddle Cherry

Smoke Cherry

Smoke Cherry

The Copeland Furniture Finish

Our standard top coat is a pre-catalyzed lacquer. The "pre" refers to the fact that the acidic catalyst is added by the finish manufacture, as opposed to post-catalyzed lacquers where the components are combined at the time of spraying. Copeland's finishes are Kitchen Cabinet Manufacturers Association (KCMA) rated - meaning they are made to withstand the type of heat, grease and spills typically found in a kitchen setting. This durability is a significant advantage over the industry's standard conventional lacquers. Also noteworthy is the matte, satin look and feel of our finish which contrasts favorably with the heavy build-up and high gloss of conventional finishes.

GREENGUARD Certified

All pieces are finished with a catalyzed lacquer/varnish finish that resists stains, moisture rings and spots, heat damage (from hot beverages, etc.), and abrasions. Finishes are formulated to meet Kitchen Cabinet Manufacturers Association (KCMA) standards and provides lasting protection. Standard finish is GREENGUARD Certified: We use a catalyzed sealer and top coat that is GREENGUARD Certified for low chemical emissions as the default finish option on all of our products. GREENGUARD certification is a testing program of UL (Underwriters Laboratory) focusing on the issue of indoor air quality. Further information about GREENGUARD certification, can be found at: http://www.greenguard.org

Hardware

This collection is available with all of the following hardware options on the center of the drawer. It is also available with all of the following options on the top of the drawer EXCEPT:

FTN-150 HGN-155 MMN-150 MMA-200 MRM-xxx* MRC-xxx*
MSC-110 RDC-100 RDA-200 BRB-xxx* BTC-xxx* RDA-200
Copeland Hardware
* "xxx" denotes that this knob is available in several different woods/stains. Contact us for details

Bed Headboards

The headboard form is 1.75” thick while the headboard panel is ¾" thick. The opening in the headboard is 34.25” off the floor and it is 3” high.

Bed Rails

  • Bed side rails are solid hardwood.
  • All Copeland Furniture bed rails are fastened with a simple to use but extremely durable system designed keep the joint firm and rigid for the life of the product. Here's how it works:
  • A headless, threaded machine bolt is screwed into the headboard. Wooden dowel pegs align the bed rail with the headboard or footboard. This forces the bed rail into proper orientation and prevents any future twisting.
  • The parts are then joined together with a special contoured washer and hex nut using the supplied open-end wrench.

Bed Slats and Platforms

Mansfield beds utilize three center support legs for additional mattress support.

Mattress support comes in one of the following forms depending on the wood selected:

Platform Kits are similar to T-Slats in that they consist of a plywood horizontal element reinforced by a solid wood spine. However they differ in that they are much wider and are intended to provide the direct support for the mattress. They come in sets of six platforms and are standard on all Cherry beds intended for mattress alone.

Bed Rails
Platform Kit

Drawer Boxes

Copeland's drawer fronts are solid wood, 3/4" thick. Drawer sides and backs are also solid wood - cherry, maple or ash - and are a full 5/8" thick. Drawer bottoms are 1/4" high-grade plywood panels (5 Layer baltic birch).

You'll notice that our drawers are joined with an asymmetrical English dovetail joint. Asymmetrical refers to the fact that the pins (seen on the drawer front) and tails (seen on the drawer side) are of different widths. This is the gold standard in traditional joinery and is both aesthetically and structurally superior to other common techniques.

Case Drawer

The drawer front integrates directly with the drawer side. Often you will find furniture where the drawer front is simply screwed on to a pre-existing drawer box. This is usually because the manufacturer has opted to purchase pre-manufactured drawer boxes rather than going to the trouble of designing, engineering and building the components to match their individual designs. Sadly, many manufacturers who market themselves as Made in the USA engage in this practice, effectively outsourcing components that make up nearly half of the product.

Some manufacturers cut corners, leaving drawer boxes unfinished. Not only is this unsightly, it is potentially hazardous to your clothing. Delicate garments can be snagged or even torn on rough unsanded surfaces and this becomes more pronounced with age as the unprotected wood is exposed to changing humidity. Copeland's drawer boxes are fully finished and sanded on the interiors.

Forty-five Degree Miter Construction

Forty-five Degree Miter construction refers to the angle in which solid wood tops and solid wood sides are joined to create a perfectly seamless perimeter. Stylistically, these cases are highly refined and visually Modern. The technique to produce this style of case requires extreme precision and is only attainable through exacting detail. The leading edge of the cases is beveled to present a thin delicate, line that belies their considerable heft.

Drawer Glides

The Mansfield collection uses an Under Mounted Soft Close Glide on all case pieces. These full extension glides provide a gentle bump as the drawer is fully extended and a soft automatic retraction as the drawer closes. Since they are under mounted there is no visible hardware.

Under-mounted drawer glide

The Mansfield collection uses an Under Mounted Soft Close Glide on all case pieces. These full extension glides provide a gentle bump as the drawer is fully extended and a soft automatic retraction as the drawer closes. Since they are under mounted there is no visible hardware.